MMF CASH DRAWER CONFIGURATION

PIN 1 WHITE Frame Ground 2 BLACK Drive 1 3 RED Drawer Open/Close Signal (+12v) 4 GREEN +24v (+12v) 5 YELLOW Drive 2 6 BLUE Signal Ground For Star receipt printers the wires should be connected: Red to Red* Black to Black* For Epson receipt printers the wires should be connected: Red to Red* Green to Black* * The Red and Black wires are attached to the solenoid 25 PIN CONNECTION: MMF recommends the following jumpers when using a 25-pin connector: JUMP 1:Pin 4 & 5 JUMP 2:Pin 6,12 & 10 POWER SUPPLY: 12vdc, 500Ma output, tip positive